KMS Motorsport Hurricane Cat Back with Rear Diffuser (unpainted) - Fiesta Mk7 ST180

This KMS exhaust is made in house with T304 stainless steel, mandrel bent and mig/tig welded.

The centre section is made in 3 inch/76.2mm pipework reducing to 2.25 inch/57mm at the rear axle where it splits into twin exit with 4.5 inch slash cut tail pipes. This part fits from the downpipe replacing the centre and rear sections, can be fitted to a standard exhaust system.

Resonated Option available for an extra centre box.

Videos available on our Youtube channel, please subscribe

https://www.youtube.com/watch?v=gcB36t-d4rI
 

Your standard exhaust will require cutting to be removed, this should be carried out by a competent person.

The rear diffuser fits into the OE bumper, it is supplied unpainted, the OE diffuser has to be removed prior to fitting and our diffuser  slots in, we recommend to use some pu sealant for additional adhesion, no modifications to the bumper are necessary.  (materials not supplied)

Composite products may need manipulation to aid fitting, we would advise fitting,prepping & painting by a competent source.

Picture shown is for illustration only showing how it may look in gloss black.

Why not complete your KMS system with a 3 inch downpipe/decat/sports cat to enhance exhaust gas flow further, reduce restriction, improve performance and driveability and allow the car to gain more POWER!

Due to the popularity of our exhaust systems, stock may fluctuate - please note we do endeavour to build a system within 10 working days if not available.