KMS Motorsport Turbo Back Exhaust "Hurricane" with Rear Diffuser (unpainted) - Fiesta Mk7 ST180

This KMS exhaust is made in house with T304 stainless steel, mandrel bent and mig/tig welded.

The downpipe is made in 3 inch/76.2mm pipework as is the centre section which reduces to 2.25 inch/57mm at the rear axle where it splits into twin exit with 4.5 inch slash cut tail pipes. This part replaces the full system, i.e the downpipe, centre and rear sections.

Resonated Option available for an extra centre box.

The rear diffuser fits into the OE bumper, it is supplied unpainted, the OE diffuser has to be removed prior to fitting and our diffuser  slots in, we recommend to use some pu sealant for additional adhesion, no modifications to the bumper are necessary.  (materials not supplied)

Composite products may need manipulation to aid fitting, we would advise fitting,prepping & painting by a competent source.

Picture shown is for illustration only showing how it may look in gloss black.

Videos available on Youtube and our Facebook page.

Your standard exhaust will require cutting to be removed, this should be carried out by a competent person.

This KMS system will enhance exhaust gas flow, reduce restriction, improve sound, performance and driveability and allow the car to gain more POWER!

The decat/sportscat may bring on your MIL (Malfunction Indicator Lamp) unless you have stage 2 software.

Please Note: An exhaust system without a catalytic converter will NOT pass a UK emission test/road side check and therefore it is not intended for road use.